Electrospinning of Nanofiber Composite from Solution of Poly(vinylidene fluoride) / Carbon Nanotube
##plugins.themes.bootstrap3.article.main##
Resumen
El artículo se dispone a tratar de la inclusión de nanotubo de carbono como adictivo en una solución polimérica de poli(fluoruro de vinilideno), para que se la utilice en "electrospinning". La manta obtenida por ese proceso fue analizada morfológicamente por microscopia electrónica de barrido (SEM). La conductividad de la solución también es un parámetro importante que es considerado en el análisis del resultado de la manta obtenida y en el aparecimiento de "beads". La conductividad de la solución y en la morfología de la manta obtenida por la técnica de "electrospinning" están relacionados por la influencia de la concentración de nanotubo de carbono.
This article proposes the inclusion of carbon nanotube additive in the polymeric solution of poly(vinylidene fluoride) to use it on the electrospinning process to obtain a mat which structure was morphologically analyzed by scanning electron microscopy (SEM). The solution conductivity is also an important considered parameter on final result analysis of the obtained mat and the appearance of beads. The conductivity of the solution and the morphology of the mat obtained by electrospinning are related by the influence of the carbon nanotube concentration.
Descargas
Descargas
Detalles del artículo
Citas
ALMASRI, Atheer, et al. Characterization of Solution-Processed Double-Walled Carbon Nanotube/Poly(vinylidene fluoride) Nanocomposites, Macromolecular Materials and Engineering, vol. 293, pp. 123-131, 2008;
ANDRADY, Anthony L. (2008). Science and technology of polymer nanofibers. [Online]. Available: http://www.wiley.com/;
BHARDWAJ, N., KUNDU, S.C. Electrospinning: A fascinating fiber fabrication technique. Biotechnology Advances, vol. 28, pp. 325-347, 2010;
BURGER, Christian, et al. Nanofibrous materials and their applications. Annu. Rev. Matter. Res., no. 36, pp. 333-368, 2006;
CARABINEIRO, Sónia AC, et al. Effect of the carbon nanotube surface characteristics on the conductivity and dielectric constant of carbon nanotube/poly(vinylidene fluoride) composites. Nanoscale Research Letters, vol. 6, pp. 1-5, 2011;
COSTA, L. M. M., et al. Effect of Solution Concentration on the Electrospray/Electrospinning Transition and on the Crystalline Phase of PVDF, Materials Science and Applications, vol. 1, pp. 247-252, 2010;
COZZA, Erika Simona, et al. On the electrospinning of PVDF: influence of the experimental conditions on the nanofiber properties. Polymer International, vol.62, pp. 41-48, 2013;
CRAMARIUC, Bogdan, et al. Fiber diameter in electrospinning process. Journal of Electrostatics, vol. 71, p. 189-198, 2013;
DEITZEL, J. M., et al, The effect of processing variables on the morfology of electrospun nanofibers and textiles. Polymer, no. 42, pp. 261-272, 2001;
FERREIRA, A., et al. Electromechanical performance of poly(vinylidene fluoride)/carbon nanotube composites for strain sensor applications. Sensors and Actuators A, no. 178, pp. 10-16, 2012;
FONG, H., et al, Beaded nanofibers formed during electrospinning,
Polymer, vol. 40, pp. 4585-4592, 1998;
HUANG, Shu, et al, Electrospinning of Polyvinylidene Difluoride with Carbon Nanotubes: Synergistic Effects of Extensional Force and Interfacial Interaction on Crystalline Structures, American Chemical Society, vol. 24, no. 23, pp. 13621-13626, 2008;
HUANG, Z. M., et al. A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Composites Science and Technology, vol. 63, pp. 2223-2253, 2003;
KANG, Minsung, JIN, Hyoung-Joon. Electrically conducting electrospun silk membranes fabricated by absorption of carbon nanotubes. Colloid Polym Sci, vol. 285, p. 1163-1167, 2007;
KIM, S. H., et al. Density measurement of size selected multiwalled carbon nanotubes by mobility-mass characterization. Carbon, vol. 47, p. 297-302, 2009;
KONKA, H. P., "Characterization of composite piezoelectric materials for smart joint applications", Master dissertation, Department of Mechanical Engineering, Louisiana State University, 2010;
LAURENT, Ch., et al, The weight and density of carbon nanotubes versus the number of walls and diameter, Carbon, vol. 48, pp. 2989- 2999, 2010;
LI, Dan, XIA, Younan, Electrospinning of Nanofibers: Reinventing the Wheel, Advanced Materials, vol. 16, n. 14, pp. 1151-1170, 2004;
NASEH, M. Vesali, et al. Funcionalization of Carbom Nanotubes Using Nitric Acid Oxidation and DBD Plasma. International Journal of Chemical and Biological Engineering, p. 66-68, 2009;
QUINTANA, René R. Balandrán, et al. Nanotubos de carbono y Bionanotecnología. Interciencia, vol. 33, no. 5, pp. 331-336, 2008;
SEOUL, Chang, et al, Electrospinning of Poly(vinylidene fluoride)/Dimethylformamide Solutions with Carbon Nanotubes, Journal of Polymer Science, vol. 41, pp. 1572-1577, 2003;
VRIEZE, S. De, et al. The effect of temperature and humidity on electrospinning. Journal Mater Science, vol. 44, pp. 1357-1362, 2009;
YU, Shansheng, et al. Formation Mechanism of ï¢-Phase in PVDF/CNT Composite Prepared by the Sonication Method, Macromolecules, vol. 42, pp. 8870-8874, 2009.