Vector Control for an Interior Permanent Magnet Synchronous Machine with Maximum Torque per Ampere Strategy

  • Edwin Xavier Domínguez Gavilanes Departamento de Automatización y Control Industrial Facultad de Ingeniería Eléctrica y Electrónica Escuela Politécnica Nacional
  • Carlos Enrique Imbaquingo Muñoz Escuela Politécnica Nacional

Resumen

Resumen: El principal objetivo de este artículo es detallar una metodología para implementar una estrategia de control de Máximo Torque por Amperio (MTPA) en una Máquina Sincrónica de Imanes Interiores Permanentes (IPMSM). Las IPMSMs han sido ampliamente usadas en los últimos años en la industria al presentar un excelente desempeño dinámico y una alta densidad de poder. En el presente estudio, criterios y teoría de la estrategia MTPA y control vectorial son detallados en primer lugar. Luego, el análisis matemático y aspectos de simulación son presentados. Finalmente, el comportamiento del control de velocidad y torque es expuesto. Los resultados muestran respuestas exitosas del sistema en estado estable y durante transitorios.

 

Abstract:The main objective of this paper is to show a methodology to implement a Maximum Torque per Ampere Strategy (MTPA) in an Interior Permanent Magnet Synchronous Machine (IPMSM). IPMSM´s have been broadly used on industry in the last years for having excellent dynamic performance and high power density. In this article, vector control and MTPA theory and criteria are firstly detailed. Then, the mathematical analysis and simulation aspects are presented. Lastly, the speed and torque control responses are exposed. The results show successful responses of the system on steady-state and during transients.

 

Descargas

La descarga de datos todavía no está disponible.

Biografía del autor/a

Edwin Xavier Domínguez Gavilanes, Departamento de Automatización y Control Industrial Facultad de Ingeniería Eléctrica y Electrónica Escuela Politécnica Nacional
Docente del Departamento de Automatización y Control Industrial de la Facultad de Ingeniería Eléctrica y Electrónica.
Carlos Enrique Imbaquingo Muñoz, Escuela Politécnica Nacional
Docente del Departamento de Automatización y Control Industrial de la Facultad de Ingeniería Eléctrica y Electrónica.

Citas

Pillay P. and Krishnan R., “Control characteristics and speed controllerdesign of a high performance PMSM,” in Proc. IEEE Ind. Appl. Soc.

Rudnicki, T.; Czerwinski, R.; Frechowicz, A., "Permanent magnet synchronous motor control driver," Mixed Design of Integrated Circuits and Systems, 2011 Proceedings of the 18th International Conference , vol., no45., pp.545,548, 16-18 June 2011

Fodorean, D.; Szabo, L., "Control of a permanent magnet synchronous motor for electric scooter application," Power Electronics, Electrical Drives, Automation and Motion, 2012 International Symposium on , vol., no., pp.1178,1181, 20-22 June 2012

Fang, J.; Heising, C.; Staudt, V.; Steimel, A., "Permanent-Magnet Synchronous Machine model for urban transport applications", Optimization of Electrical and Electronic Equipment, 2010 12th International Conference on , vol., no., pp.358,363, 20-22 May 2010

Shoudao Huang; Ziqiang Chen; Keyuan Huang; JianGao, "Maximum torque per ampere and flux-weakening control for PMSM based on curve fitting," Vehicle Power and Propulsion Conference (VPPC), 2010 IEEE , vol., no., pp.1,5, 1-3 Sept. 2010

Odhano, S; Giangrande, P; Bojoi, R., “Self-commissioning of Interior Permanent MagnetSynchronous Motor Drives With High-

FrequencyCurrent Injection”, IEEE Transactions on Industry Applications, vol, no 50, issue: 5, March 2014

Hassan, A.and. Azzam, M; “Robust control of a speed sensorless permanentmagnet synchronous motor drive”, Faculty of Engineering. El-Minia University, El-Minia, Egypt.

D.W. Novotny and T.A. Lipo, “Vector Control and Dynamics of AC Drives”, Oxford University Press, New York, 1998.B.

Kitajima, J.; Ohishi, K., "Rapid and stable speed control of SPMSM based on current differential signal," Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE-ASIA), 2014 International , vol., no., pp.1247,1252, 18-21 May 2014

PSIM User`s guide, Version 9.0, Release 3, May 2010. Available at: www.powersimtech.com

Maekawa, S.; Hinata, T.; Suzuki, N.; Kubota, H., "Study of low speed sensorless drives for SPMSM by controlling elliptical inductance," Power Electronics Conference (IPEC-Hiroshima 2014 - ECCE-ASIA), 2014 International , vol., no., pp.919,924, 18-21 May 2014

Guest, P., “Numerical Methods of curve fitting paperback”, Cambridge University Press, London, 2012.

Kim, Sang Min; Kwon, Taesuk, "A simple method to minimize effects of temperature variation on IPMSM control in real-time manner," Energy Conversion Congress and Exposition (ECCE), 2014 IEEE , vol., no., pp.4212,4217, 14-18 Sept. 2014

Gubae Rang; Jaesang Lim; Kwanghee Nam; Hyung-Bin Ihm; Ho-Gi Kim, "A MTPA control scheme for an IPM synchronous motor considering magnet flux variation caused by temperature," Applied Power Electronics Conference and Exposition, 2004. APEC '04. Nineteenth Annual IEEE , vol.3, no., pp.1617,1621 Vol.3, 2004

Ahmed, A., “Maximum torque per ampere (MTPA) control for permanentmagnet synchronous machine drive system”, Master Thesis, University of Akron, Ohio-USA

Antonello, R.; Carraro, M.; Zigliotto, M., "Towards the automatic tuning of MTPA algorithms for IPM motor drives," Electrical Machines (ICEM), 2012 h International Conference on , vol., no., pp.1121,1127, 2-5 Sept. 2012

Mademlis, C.; Kioskeridis, I. and Margaris, N., “Optimal efficiency control strategy for interior permanent-magnet synchronous motor drives,” IEEE Transactions on Energy Conversion, vol. 19, no. 4, pp. 715–723, Dec. 2004.

Publicado
2015-02-28
Cómo citar
Domínguez Gavilanes, E. X., & Imbaquingo Muñoz, C. E. (2015). Vector Control for an Interior Permanent Magnet Synchronous Machine with Maximum Torque per Ampere Strategy. Revista Politécnica, 35(1), 118. Recuperado a partir de https://revistapolitecnica.epn.edu.ec/ojs2/index.php/revista_politecnica2/article/view/391